View Full Version : Lee 6 cavity C312-185-1R?
I have heard good things about the C312-185-1R for 7.62x54R, but I dont care for a single or two gang mold. Have several Lee 6cavity molds, and wonder if they can make one of these in a six gang? Sounds like it should be a common enough deal. Maybe someone has already done it?
45 2.1
02-27-2007, 03:01 PM
Measure the length of the boolit, if it is over 1.05" it will be too long to adequately fit in LEE six cavity blocks.
doc25
02-27-2007, 08:05 PM
It's not in the catalog.
Well dang, I called Lee, and the answer in no. The boolit is too long for a sixer.
brimic
02-28-2007, 06:48 PM
I just ordered one of these recently directly from Lee as its listed in their overstock/surplus/discontinued portion of their website. I got a bum mould as mine cast w/ws at .310 on the driving bands and .299 on the nose- way undersized for a M-N or enfield. Luckily, it should work great for my K-31s.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.