PDA

View Full Version : 480 RUG primer of choice



white eagle
12-06-2011, 08:06 PM
Do you all have a preference as to which primers ya use in the 48o Rug ? :Fire:

DLCTEX
12-06-2011, 10:41 PM
I use Win LP as that is what I had when I first got it. I cast the Lee 400 gr. boolit and load it over 21 gr. H110 as recommended by a forum member. It shot so well I've never tired to change anything.

223Pitbull
12-06-2011, 11:49 PM
I use Wolf LP primer with 20.1 gr. of H110 with good results.

white eagle
12-07-2011, 12:47 AM
I have been using mag primers but I am going to try the non mag type
been getting real good accuracy with the cci 350 though

Lloyd Smale
12-07-2011, 07:54 AM
If its a redhawk id be using fed primers as they go off eaiser and redhawks have a tendency to not be reliable in double action especially if trigger work was done.

44man
12-07-2011, 12:56 PM
I have been using mag primers but I am going to try the non mag type
been getting real good accuracy with the cci 350 though
I would stay with a mag primer, I like Fed 155.
The case is large enough where accuracy should be better.

Viper225
12-07-2011, 01:07 PM
CCI 350 Large Pistol Magnum Primers for my hunting loads using AA#9 or H110.

Standard Large Pistol Winchesters for shoot shells, and plinking load using 8 gr of Unique.

Bob R

white eagle
12-07-2011, 06:20 PM
I would stay with a mag primer, I like Fed 155.
The case is large enough where accuracy should be better.
oddly enough that is what I am finding
definite preference for the mag primer [smilie=p:

buck1
12-10-2011, 08:14 AM
Me too, mags seem to be a bit better.

warf73
12-10-2011, 03:34 PM
I looked and I'm using Win. Large Pistol, seem to be lighting 296 and red dot with no issues.