View Full Version : Well, I need a little help on this project
IceKing02
12-05-2011, 05:53 AM
My first need is for the little pin that holds the front blade in place on a Japanese Winchester 1895 in .405 Winchester. I have the blade sight, just no pin to keep it in place. Any pointing in the right direction would be much appreciated.
Yours,
IceKing02
Mooseman
12-05-2011, 06:26 AM
Cutting to length the shank off an old drill bit the correct size works, or most good gunsmiths have all kinds of pins in stock.
In a Pinch , if nothing else use a roll pin available at most larger auto and hardware stores.
Rich
Mohillbilly
12-06-2011, 06:01 AM
Or call Browning/Winchester here in Arnold Mo.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.