View Full Version : lyman 45 help
blackbike
12-04-2011, 06:59 PM
Just got a lyman 45 lube sizer that needs work. I am close to making it work, but need to know what dies will work on this and a list to id. top punches or any helpfull info.
THANKS
cheese1566
12-04-2011, 07:04 PM
Regular Lyman and RCBS dies and top punches will work.
The dies are held by a set screw in the front of the body. JUST be darn careful not to over tighten as you will crack the housing!!!
Lyman 45 and Lyman dies. RCBS will work, as well, though some casters have found they don't.
Lyman's Cast Bullet Handbook third edition, has a Lyman mould/top punch cross reference.
blackbike
12-04-2011, 07:32 PM
Thanks found that list in lyman 3rd.
and good tip on set screw.
Keith Sacane
12-05-2011, 07:56 PM
I was wondering the same thing. I'm trying to get a Lyman 45 back into a working condition as well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.