obsolete screws

[adrians]

this is a justified plug for EVANS OBSOLETE SCREWS.
Scott stonehill is the man .
i needed a locking screw for my rawson target sight but didn't have the screw to mount the aperture post to the plate ,so i got in touch with scott and he custom made me a knurled screw to my specs(can be tightened with a quarter ot just finger tight ).
he is a very easy man to deal with and if you need that one srew/ fastener that is almost impossible to find he can make it.this is screw was for my rawson (australian) target peep for my 2a1 ishy basically a #1 mk3 enfield.
thank you so much scott....:bigsmyl2:

[walltube]

Scott will deliver you from purgatory if you are in dire need of a replacement for a damaged or missing Parker-Hale PH5A "long" screw to fit a Lithgow No.1 Mk.III.

The razor thin factory slot of my P14 stacking swivel screw was badly damaged. Scott made a new screw that would accomodate a sensible screw driver blade.

Scott Stonehill is good man to deal with.

[gnoahhh]

Good to know. Thanks.

[Pepe Ray]

I find. neither a link nor a snail mail addy.

Are we to be left in limbo?

[Artful]

http://www.customscrewsandmore.com/

sstonehill (at) knology dot net

you know what to due with the @ at sign and . dot


Evans Custom Screw and Machine

Scott Stonehill

4371 Lake Idylwilde Dr.

Evans, GA 30809

Phone: 706 dash 833 dash 9048

[Pepe Ray]

Thank you.
Pepe

[El Bango]

I'll have to remember this,some things are hard for even me to do.