NOE 338320 201Gr. FN (SHIPPED)

[SwedeNelson]

NOE 338320 201Gr. FN
THIS BUY IS COLSED
http://i69.photobucket.com/albums/i80/swedenelson/1111-151338320201GrFN.jpg

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer gas check or plain base on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
1 376Steyr 3 cavity GC
*2 ohiochuck 5 cavity GC w/HP
3 sharpshooter3040 5 cavity GC
4 sharpshooter3040 2 cavity GC w/HP
5 LEADHOPPER 4 cavity GC
6 hithard 3 cavity GC
*7 Mibo 3 cavity GC
*8 missionary5155 3 cavity 1GC 2PB
*9 dromia 4 cavity GC drill for probe
10 x101airborne 5 cavity GC w/HP drill for probe
*11 mtnman31 2 cavity GC
12 FLYCUTTER 5 cavity GC drill for probe
13 Slow Elk 45/70 3 cavity GC w/HP
14 chrisw 2 cavity GC w/HP drill for probe
15 woodtroll 2 cavity GC drill for probe
*16 TCTex 4 cavity GC
17 wool1 4 cavity GC w/HP
*18 TheCelt 3 cavity GC drill for probe
19 J.. 4 cavity 2GC 2PB
*20 ol skool RG2 cavity GC
*21 cainttype 5 cavity GC
*22 rockrat 5 cavity GC
*23 tygar RG2 GC
24 IIJSavoy 2 cavity GC
*25 PbHurler 4 cavity GC drill for probe
*26 dodgyrog 4 cavity GC
27 Silfield 3 cavity 2GC 1PB
*28 davidh195 4 cavity 2GC 2PB
29 8mm 2 cavity 1GC 1PB
*30 BigboreShooter 2 cavity GC
31
32
33
34
35

(*) = Paid

Not getting screen names on all the orders so will
make a zip code list of paid orders
94553
NR18 9NH
83647
59422
73099
NN14 2QB
22303
97537
DH3 2AY
70611
60451
61834
DH8 7NH
48615
81403
32571
01462
52353
83341
59801


Thanks
Swede Nelson

[376Steyr]

I'll take a 3 cavity. Thanks!

[ohiochuck]

I will take a 3 cavity GC.
Thanks!
Jim

[sharpshooter3040]

put me in for 2, 5 cavity gas check, and one 2 cavity hollowpoint. Three moulds total


Thanks for running this buy


Doug

[LEADHOPPER]

I'll take a 4 cavity GC.
Thanks
LH

[hithard]

3 cavity with GC,

Thank you

[Mibo]

Please put me.down for a 3 cavity all GC
thanks
Mike

[8mm]

In for a 3 cavity GC

Thank you

[dromia]

1 x 4 cav GC drill for probe. :D

[sharpshooter3040]

bump up

[SwedeNelson]

Updated list
Bump
You can check the scheduale here:
http://castboolits.gunloads.com/showthread.php?t=130122

Swede Nelson

[sharpshooter3040]

bump to front

[x101airborne]

Well, since this is so far out.... Im in. I dont even own a 338, but would love a 338 federal. 5 cavity with the last hollow pointed. Drill for probe. Thanks.

[ohiochuck]

Please change my order from 3 cavity to 5 cavity GC, please.
Thanks!
Jim

[SwedeNelson]

Checked list
Bump

Thanks for the orders
Swede Nelson

[winelover]

Updated list
Bump
You can check the scheduale here:
http://castboolits.gunloads.com/showthread.php?t=130122

Swede Nelson

Link to schedule isn't working!

Winelover

[x101airborne]

Now you know it is bad when you dont own a rifle in that caliber, but you get so excited to see the group buy that you dont even realize you already signed up for the buy! I am gonna start the first CastBoolits therapy group. I'll start.


Hi. My name is Trey and I have a casting addiction.

[SwedeNelson]

Checked list
Bump

Swede Nelson

[SwedeNelson]

Checked list
Bump

Swede Nelson

[SwedeNelson]

Checked list

Bump

Just so we have no misunderstandings this
buy is on the schedule for December 2012

Thanks
Swede Nelson

[sharpshooter3040]

bump for interest

[SwedeNelson]

Update
Will try to keep all buys current on the schedule:
http://castboolits.gunloads.com/showthread.php?t=142415
If you have questions about our policy you can see it here:
http://castboolits.gunloads.com/showthread.php?t=156593

Bump

Swede Nelson

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[SwedeNelson]

Bump

Swede Nelson

[FLYCUTTER]

Put me down for a 5 cavity GC, drilled for probe, and hp on one cavity. Thanks Swede !!

[mtnman31]

Sign me up for a 2 cavity, gas check.

[Mr Peabody]

Put me down for a two cavity GC

[SwedeNelson]

Updated List

Bump

Thanks for the orders
Swede Nelson

[FLYCUTTER]

Swede, you missed me I'm post #26
Thanks, Bob

[SwedeNelson]

FLYCUTTER

Sorry about that good friend
Done

Swede Nelson

[ohiochuck]

Please update my order by adding an HP of one cavity

ohiochuck 5 cavity GC with one HP
My money order is on the way to you!

Thanks!
Jim

[chrisw]

looks great and I'm going to want 1, not sure quite yet exact config

the $35 HP charge per cavity? So, a 2 cavity both HP= 72 +(2×35)=142? And 4 cavity 4x 35?

thank you!

[SwedeNelson]

Bump

Swede Nelson

[Slow Elk 45/70]

:groner:Hullo Swede...Please add me to this buy if not to late...1ea-3 cav GC W/1 HP & pins

[Shakey Jakey]

Ill take a 3 cavity GC. Thanks

[chrisw]

hi! Can I get on the list for a 2 cavity, gas checked, 1 HP, drilled for probe?

thanks!

[Aaron]

Please add me for five avitygas check.

Thanks

Aaron

[ohiochuck]

Swede,
My Winchester 1886 in .33 Winchester is getting hungry for these silver boooolits.
Jim

[SwedeNelson]

Updated list

Bump

Thanks
Swede Nelson

[Mr Peabody]

Al; I would like out of this one. I want to get the 358009 worse.

[ohiochuck]

HI SwedeNelson!
Can you advise when this mold will be made? I notice I am the only one paid at this time. My Winchester 1886 .33 Winchester is hungry.
Thanks!
Jim

[chrisw]

HI SwedeNelson!
Can you advise when this mold will be made? I notice I am the only one paid at this time. My Winchester 1886 .33 Winchester is hungry.
Thanks!
Jim

this buy isn't "dead last" but its real real close!

17 unscheduled buys ahead of it (out of the 18 others), And schedule is currently out to May @2 a month... Based upon Data I make a guess for December 2035 [smilie=b:

that said, NOE is changing things around pretty seriously, so *maybe* they will get caught up enough to change their way for scheduling for these old (this is currently one of the older ones isn't it?) molds. I understand the reasoning but I feel real sorry for the guys who signed up in the discussion thread... It would be nice if they had some sort of function that balanced age with numbers for "unpopular" calibers like this IMHO.

edit- new molds shouldn't bump this one. Especially since new GB are on hold!

[Shakey Jakey]

Al, Please take me off this one. Thanks

[SwedeNelson]

Updated list
Bump

ohiochuck, others

We are starting to make headway on our backlog.
I would very much like to have it in order by next spring or early summer.
That would be having everything current and taking on new group buys.

2035 .................................................. ........LOL :-D







Swede Nelson

[Woodtroll]

If this buy ever comes up, I would like to have a 2-cavity GC, drilled for probe.

Thank you,
Regan

[SwedeNelson]

Updated List

Bump

Swede Nelson

[TCTex]

I would like to be put down for a 4 cav-all GC’ed.

[SwedeNelson]

Updated list
Bump

Swede Nelson

[wool1]

I'm in.....4 cavity GC with a HP cavity

wwoolson68 (at) gmail (dot) com

[FLYCUTTER]

Al, what do I need a bullet mold for in 2035 ? I'll be in a nursing home with a drool cup around my neck. LOL

[TheCelt]

Hi Al, Believe I'll be having a 3 cavity mold, all GC, drill for probe

[SwedeNelson]

Updated list
Bump

FLYCUTTER
Dang - I hope I can get it done before 2035
Maybe I should start working from both ends of the list
Do you think that would work?
Already burning candles from both ends!
Hang in there and thanks for sticking with me

Swede Nelson

[missionary5155]

Good morning
My post diasappeared ????
Please put me in for a 3 cavity mold. 2 cavities Plain base 1 cavity Gaschecked
Thanks ! Will ship to ILLinois.
Mike in Peru

[J..]

Can the GC/PB be mixed within the same mould? If so. I'd like a 4-cav. as a 2GC/2PB.
If thats not in the cards, I'll take one 4-cav PB and one 4-cav GC.

[dromia]

It is not that far away, I'd put this in for Jan 2014 if Al keeps up his rate of delivery.

[8mm]

Please remove me from this buy (#9 on the list). Thank you.

[SwedeNelson]

Updated post
Bump

Swede Nelson

[ol skool]

4 cavity all GC, 2 holes HP. Noobie here, glad to get on the list before it closes.

[SwedeNelson]

Updated list

Bump

Swede Nelson

[ol skool]

need eight more

[cainttype]

I'll join in for a 4 cav gas-check.

[rockrat]

5 cav gc

[ol skool]

Well it's up for January 2014 unless a new GB comes up with over 30 to bump it back.

NOE 338320 201Gr. FN (http://noebulletmolds.com/NV/schedule.php?osCsid=g8865sbd7nq8o1uno7uoepbu34)

[tygar]

Hi, I'll take a 2 cavity GC with HP/solid.
Thanks
Tom

[ol skool]

ol skool here No. 22. May I change mine to 2 cavity all GC, with HP and FP pins? Please and Thank you!

[SwedeNelson]

Updated list
This one is on for next month

Bump

Swede Nelson

[TheCelt]

That is GREAT news Al!! I have been waiting for this one!!!

[cainttype]

Al, is there any chance of seeing this offered in RG4 configuration in the future? I've just received my 1st moulds from you, a 5 cav RD 311 165 and a 378 275 RG4...Haven't had the chance to use them yet, but it won't be long. I was pleasantly impressed.
If the RG4 version is in the cards for later, it'll have good company.
Also, please change my current order to 5 cav, drilled for probe.

[IIJSavoy]

If not too late, can you add me in for a 2-Cav GC mold.

[PbHurler]

Ooooh, I'd like one: 4 cavity GC, drill for probe

Thanks Swede

[FLYCUTTER]

Hi Al, I would like to change my request . I am #13 on the list and would like a 5 cavity gas check drilled for probe. I want to drop the hollow point option.
Thank you . Bob

[dodgyrog]

Put me down for a 4 cavity GC mould please.
Merry Christmas to you all.

[Woodtroll]

Just checking in on the status of this group. Mould buys on either side of this one on the schedule have closed, so I wanted to make sure I wasn't missing something! In no hurry and not fussing, just keeping an eye on this one!

Thanks,
Regan

[Silfield]

Please put me down for a 3 cavity gas check mould if I am not to late.
Thanks.
Ian.

Edit-Could I please change one of the cavities to Plain Base.
Many thanks.

[dromia]

Welcome to Cast Boolits Ian. http://img.photobucket.com/albums/1003/adamsutherland/Smilies%20FB/FB%20UK%20Smilies%202/icon_wave.gif

You will not be disappointed, NOE moulds come highly recommended. http://img.photobucket.com/albums/1003/adamsutherland/Smilies%20FB/FB%20UK%20Smilies%202/sSig_goodjob.gif

[davidh195]

I would llike a 4 cavity mould please, 2 cavities gas check 2 plain base.
Thank's
David

[Silfield]

Thanks Adam,
Looking forward to casting some proper boolits!

[8mm]

Swede,
I dropped out earlier but now that this GB is really going to happen, I am back in for a 2 cavity mold: 1 GC and the other PB. Thanks.

[SwedeNelson]

Will close this one wednesday 1/29
Will be running this through our website
Will get a request for payment out with a discount code to use

Swede Nelson

[sharpshooter3040]

Hi Swede thanks for running this buy. I am running tight on funds. could you please drop one of the 5 cavities moulds? I'm still in for the other two. Hope this doesnt create problems.

Thanks Doug Cates Sharpshooter 3040

[ohiochuck]

How does the discount code work if you have already paid?
Thanks!
Jim

[BigboreShooter]

Hi Swede,
If it not too late, put me down for 2cav.- gc.
Thank You
BigBoreShooter

[ol skool]

Not sure how to make payment... Hope I didn't miss something.

[SwedeNelson]

THIS BUY IS CLOSED
A little behind
Updated list
Will get it listed on the website and a PM out with the discount code

ohiochuck
Will check your order and see what you paid
If a discount is in order will send it with your order - no problem

Swede Nelson

[tygar]

List of orders
23 tygar RG2 GC
(*) = Paid

Thanks
Swede Nelson

Hi, I see I'm in for a RG2. Please make it 2 cavity solid if possible.
Thanks
Tom

[ol skool]

Hi:

I just paid for my 2 cavity GC and HP pins.

But I'm not clear if 'double ended pins" means it'll cast a solid too? Does anyone know?

[SwedeNelson]

ol skool

RG moulds come with 2 sets of pins 1 FN and 1 HP

Swede Nelson

[ol skool]

Swede:

Thanks, looking forward to this. Thank you for making it available.

[cainttype]

I've already paid for my mold, Al, but looking over the orders list I noticed a couple of RG versions requested. Are RGs actually available in multi-cav versions? In the buy's description, I thought the only HP option was in 1 cav of the mold for an additional fee...If so, are you going to also offer RG4s?

[Woodtroll]

Hello Al,

I'm confused; going through the website to order, a 2-cavity FN GC mould with lube, punch, and drilled for probe comes out to $90.15 shipped, even with the 5% discount. On the first post of this thread these were offered at $72 for the double cavity, plus $10 S/H, and the extras were included. Am I doing something wrong on the website, or how do I get the original price?

Thanks,
Regan

[ol skool]

Is it OK to say I'm happy to pay whatever the current asking price. Seems pretty good value to me. I only hope there's enough in it for Swede to buy a Pepsi and keep the lights on.

[SwedeNelson]

Woodtroll
PM sent

Originally we did not include RG moulds on this buy
But it can be done so we have taken some orders for them

This one will be on the mill Monday
If you haven't got your order in and want one now is the time
If you would still like one and need some time - PM me

Swede Nelson

[SwedeNelson]

First Cast

http://i69.photobucket.com/albums/i80/swedenelson/340320201GrFN001.jpg

Should ship by the end of the week
Swede Nelson

[TheCelt]

FINE lookin Boolits Al!!!!! I am chompin at the bit to shoot some of those and get a good load worked up for deer season next year!!!

[SwedeNelson]

All but the HP's have shipped
Will try to get the balance out this weekend

Thanks to all that ordered.
Bullet maker, maker
Swede Nelson

[PbHurler]

Mould arrived today Swede, another beautiful milling! Gonna preheat it & hopefully put it through it's paces this weekend.

Thank You!

[sharpshooter3040]

The listings are gone on the web site. I cant pay for the moulds I ordered. Let me know what I need to do

Thanks
Doug

[SwedeNelson]

Sharpshooter3040

Will get the extras listed and back on the website

Swede Nelson

[sharpshooter3040]

Thanks Sweede I am out of town alot how will i know when you list them. it seems using this system people have access to be able to buy out my order. I remember seeing them listed, just a week before payday now there gone. I ordered a 5 cavity w/gas check and a 2 or 3 cavity one drilled for hollow point also a gas check. seems very confusing. didnt know you had an after the fact price increase also,but i have been very busy lately and havent been keeping up I guess.

Thanks
Doug

[sharpshooter3040]

hello sweede i got your pm on relisting the 338 moulds. if you did once again someone else bought out my order. I have been waiting for two years for this mould. This is beyond frustrating. I appologoze for the untimelyness of paying for them. I work out of town three weeks out of the month and dont live on my computer. I hope some more will be listed it seems this is an extremely popular mould

thanks
Doug

[SwedeNelson]

sharpshooter3040

I will get your order together and PM you.
2 years is way to long - I appologoze for that.

Swede Nelson

[sharpshooter3040]

thank you Swede that would be awesome

Doug

[TheCelt]

You're gonna like this one Doug!!!

[Silfield]

Hi Swede,
My mold arrived safe this morning here in England. All I can say is Wow! Fantastic looking mold, cant wait until I can get to use it.
Thanks.
Silfield.