BigSlick
02-17-2007, 01:50 AM
I've got a 40SW bullet that is giving me fits. It's a lightweight (155gr) and short as the dickens compared to others I've seen/used/cast in this size.
No adjustment will fill the groove properly and not squirt lube all over the base or the nose, depending upon how much heat and pressure is applied.
I've tried 7? and it's too small, #6 is too large. I really don't want to epoxy this tonight, but I'm all setup and got about 300 left to do.
Any suggestions ?
Thanks guys ;)
'Slick
________
NUDE GIRLS (http://www.****tube.com/video/6865/jerry-springer-show-with-nude-girls)
No adjustment will fill the groove properly and not squirt lube all over the base or the nose, depending upon how much heat and pressure is applied.
I've tried 7? and it's too small, #6 is too large. I really don't want to epoxy this tonight, but I'm all setup and got about 300 left to do.
Any suggestions ?
Thanks guys ;)
'Slick
________
NUDE GIRLS (http://www.****tube.com/video/6865/jerry-springer-show-with-nude-girls)