View Full Version : Remington Light 9 hulls
perimedik
10-30-2011, 11:05 AM
has anyone heard or them? I can not find it in the manuals I am using.
I would like to see if there is any data to use them.
I have about 100 hulls. probaby just gonna use them for trap rounds.
It's a green hull, 8 point crimp, low brass, REMINGTON PETERS 12 GA headstamp.
I have WAA12 wads and W209 primers Unique and RedDot powders
wad/powder/shot combo?
oneokie
10-30-2011, 02:49 PM
Send an email to Alliant.
perimedik
10-30-2011, 04:08 PM
Send an email to Alliant.
sent thanks thay have an "ask the experts" email section.
Johnch
10-30-2011, 05:10 PM
If these semi new hulls
I bet if you compare them to Rem STS or Gun club hulls
They will be the same expect for color
If older than 8 years old
I would cut one in1/2 and compare to known hulls
John
skeettx
10-30-2011, 10:59 PM
You talking about hulls like these
http://www.hunt101.com/data/500/medium/MVC-045S1.JPG
The Remingtons were green and the Peters were blue, like the old Blue Magic or RXP hulls
If so, load them like the old AA Winchester hulls
I load mine with 17.8 grains of Red Dot, Claybuster Wad, 7/8 ounce of shot.
If you are using the Win AA White wad, try 18.0 to 18.5 Grains of Red Dot, and 1 1/8 ounce of shot,
As listed in Lyman Shotshell Handbook, 3rd Edition
Please report back on how they work for you
Mike
perimedik
10-31-2011, 07:26 AM
skeettx those are exactly it.
Light 9 though. (9 shot I guess)
Cool thanks. I've been checking a few forums and I did email Alliant (should hear back)
I have few blue hulls (Marked Peters) , Mostly green Remington hulls though.
skeettx
10-31-2011, 10:41 AM
Let me know if you need a specific load and I will look it up in my books
As I get older I have moved from hard kicking 1 1/8 ounce loads downward
Mike
perimedik
10-31-2011, 10:50 AM
I'll reach out top you soon - Thanks
here are the shells I got with the press.
About 200 AA huls
About 100 Remington Hulls
20 Peters hulls
http://i240.photobucket.com/albums/ff170/perimedik/100_4644.jpg
I was goofing with the press, decapped these and seeing the function of the press.
skeettx
10-31-2011, 02:37 PM
Sweet
Mike
perimedik
11-08-2011, 04:36 PM
got the email back from Alliant ask the experts
They said use the data from the STS table
Newtire
11-11-2011, 01:20 AM
I've loaded plenty of those. They make a good hull for HS-6 and 1-1/4oz. for a pheasant load as well as being great for the lighter loads down to 7/8oz. even.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.