Made a caseholder for trimming

[Chicken Thief]

I needed to ream some casenecks today and took out my old Lyman universal case holder (***!), and after 5 cases and fits i made one that actually works.

It utilises the original shell holder and a pin that goes into the primer pocket to center the case and lock it in place.


The Lyman. Notice how little of the "gripper" that actually holds the case in place.
http://i295.photobucket.com/albums/mm153/Chickenthief/Skydning/R0010659.jpg

Here is my gizmo
http://i295.photobucket.com/albums/mm153/Chickenthief/Skydning/R0010660.jpg
http://i295.photobucket.com/albums/mm153/Chickenthief/Skydning/R0010661.jpg
http://i295.photobucket.com/albums/mm153/Chickenthief/Skydning/R0010662.jpg
http://i295.photobucket.com/albums/mm153/Chickenthief/Skydning/R0010669.jpg
http://i295.photobucket.com/albums/mm153/Chickenthief/Skydning/R0010672.jpg

[TXGunNut]

Delete the pictures! Apply for a patent (or whatever it takes in Denmark) and make some money off your work. It's similar to the Lee but enough of an improvement that it might work. I like it!