CZ 52 report [Archive] - Cast Boolits

Freightman

10-05-2011, 02:20 PM

I had been having trouble with the trigger pin walking out on my CZ52 so I preened a spot on both sides and it fixed that. I shot 150 rounds of my reloads with WC820 very accurate and not one misfire or FTF. of course I had to chase my brass about 15 yds to my right rear but found all of the brass. Great day at the range.
and no lead and they are honking.

WARD O

10-05-2011, 02:43 PM

That is one very nice pistol - and pretty reasonable too....

What are you using for brass?

Ward

Freightman

10-05-2011, 05:22 PM

223 cut down, trimmed, had a bunch and didn't want to buy any.
Here it is I have four factory mags. I use the 93gr LEE boolit at 1650fps with the WC820 and that is the light load haven't tried the top one and do not plan to. I have no pressure signs as the primers still have round edges.

WARD O

10-05-2011, 06:38 PM

Is there much work in reforming the brass?

leftiye

10-05-2011, 10:33 PM

New brass does exist. Fits better.

badbob454

10-05-2011, 10:42 PM

223 cut down, trimmed, had a bunch and didn't want to buy any.
Here it is I have four factory mags. I use the 93gr LEE boolit at 1650fps with the WC820 and that is the light load haven't tried the top one and do not plan to. I have no pressure signs as the primers still have round edges.

freightman , what is your light load with the wc 820 i would like to develop a load for mine
also selliers and bellot is good boxer ammo , great to reload

Freightman

10-07-2011, 09:38 AM

My WC820 is just like AA#9 so I just used the load data that is on the sheet that came with the LEE dies 93gr Jacketed bullet 11.1 gr #9----low and 12.3 max 1779fps for max. I used 10.9gr and had no pressure sign. Be careful the hand you save may be yours.