View Full Version : Hey no 1
cabezaverde
02-04-2007, 07:07 PM
Based on your post in the "My Single Shots....." thread, I take it your are shooting cast in your 375 Winchester Ruger #3.
I haven't really done all that much experimenting with mine yet using cast. Any tips, pitfalls, experiences, or loads to share?
Of course, Cast your chamber and seat the bullets out as far as you can. I have tried the 37-250 and the 377449. Both shot so-so and that is because all I did was load up some mid-range loads when I got it so I could check it out but have not really had the chance to ring it out real good. I believe that a much heavier (read as longer) bullet would do that thing justice. I have so many things going on right now that I have not dropped the hammer on that thing in about 2 years. What I do remember is when you drop the hammer on that light rifle with a healthy load, it will sting a little. Not as much as the 45-70 in the #3's but more than the .44 in the #3's. I really enjoyed the 30-40 #3 with J bullets. It was a pure joy to shoot.
You might want to check with BruceB as I think he has/had one.
Robert
Based on your post in the "My Single Shots....." thread, I take it your are shooting cast in your 375 Winchester Ruger #3.
I haven't really done all that much experimenting with mine yet using cast. Any tips, pitfalls, experiences, or loads to share?
waksupi
02-05-2007, 09:19 PM
Happy B-day, No_1!
Thanks man! Another one down and too many to count left. Raise you glass with me.
Robert
Happy B-day, No_1!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.