View Full Version : Contender DIsassembly
timkelley
09-25-2011, 09:48 PM
Does anyone know of a website having assembly/disassembly instructions for a T C Contender. I went to take mine apart for the first time in about 25 years and found I have forgotten how.:wink:
blaser.306
09-25-2011, 09:54 PM
I have an exploded view if that helps ? You can PM me your email and I will send it to you ! Apart is easy , together can be a little different . If I can do it anybody can !!!
canyon-ghost
09-25-2011, 11:26 PM
The trigger assembly is a 3/32 pin punch, not 1/8", since it is inside a roll pin. It's easy if you remove the screw at the rear first.
calaloo
09-26-2011, 08:29 AM
You might find the info here.
http://stevespages.com/page7.htm
Guaranteed you will find something interesting.
timkelley
09-26-2011, 11:10 AM
Thanx Guys, I will wait a while before I just jump in. When younger (like 30 years) I'd just tear it apart but now I am a bit more cautious.
uscra112
09-27-2011, 11:34 AM
The Bellm site may point you to diassembly instructioinis, but be cautious about the "advice" you get there. Some of it is hogwash, meant to sell you parts and/or services you don't need.
D'you have a Gen 1 or a Gen 2 ?
timkelley
09-27-2011, 09:17 PM
Mine is a 1978 model. I have an owners manual and a new hammer spring coming from TC, nice folks.
fourarmed
09-28-2011, 05:37 PM
Be sure to make a slave pin to hold the hammer and spring together until you get them in place. It's an easy job if you do, and an incredible PITA if you don't.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.