Who makes this boolet???

[abunaitoo]

I have a boolet that I want to get a mould for.
It's 431 di, about 300gr, gascheck.

[Buckshot]

.............My guess is LBT.

..............Buckshot

[PacMan]

Dont think it is a LBT but i have been wrong before.

[excess650]

looks like a SSK design cut by NEI

[Beerd]

looks like a SSK design cut by NEI

kinda what I thought too.
..

[abunaitoo]

I've looked all over and can't find anything that looks like it.
Does LBT have somekind of picture listing???
Couldn't find it.
NEI dosen't have it.
At least I can't find it.
Who's SSK????

[PacMan]

LBT does have pictures of most of his designs on his web site but i will bet good money it is not one of his.
You could send your picture to Accurate molds and i would think that he could reproduce the bullet/mold for you.

[Wayne S]

I've looked all over and can't find anything that looks like it.
Does LBT have somekind of picture listing???
Couldn't find it.
NEI dosen't have it.
At least I can't find it.
Who's SSK????
1. It looks like an "Old West" mold I had years ago
2. It doesn't look like anything LBT has in their catalog
3.SSK is J.D.Jones 's shop, and the mold looks a lot like a SSK mold that I had in .358 a long time ago.
4. "Google" LBT there catalog is on his web site.

[stubshaft]

Veral wouldn't put a shoulder on his LFN designs and his Keith Type boolits have a bigger shoulder. NEI did not list the SSK boolit in their catalog as it was AFAIK designed for J.D. Jones at SSK. I had the .44 and still have the .358 molds from them which I used in Sillywett. The .358 is the most accurate boolit I've found for the Marlin 1894C with MG rifling.

This is the .358 mold.

[abunaitoo]

It kind of looks like it's a NEI #266 from some pictures I've found.

[crabo]

The shallow, rounded lube grooves look a lot like LBT, from what I can tell from the picture.

[justingrosche]

Accurate molds would be my wager. I'll have to double check when I get home in the morning, I believe I have that mold.

[justingrosche]

nope, I was mistaken. My mold ( from Mountain molds) is totally diffrent.
So I have no idea.

[btroj]

Heavy on sarcasm here- bet that bullet was made by a person with the correct mould for said bullet. Now who makes the mould is an entirely different question.