Saeco 322

[BCall]

Anyone else have a Saeco 322? It is supposed to be for the 32-20, a 118 gr .313 RNFP. I was just looking at the Saeco mold catalog, and the picture they show has a single lube groove with a crimp groove. Mine has 2 lube grooves and a crimp groove. Did they make 2 different ones? Anyone have one with a single lube groove that they might have a pic of? Thanks, Billy

[Jon K]

Just now saw this thread. Here's my #322

http://i94.photobucket.com/albums/l101/Jon_K_2006/Saeco322001.jpg

[BCall]

Thanks Jon! Looks like they did make 2 different ones. My 322 is the 3rd from the right in this pic, with 2 lube grooves. Much appreciated, Billy
http://i258.photobucket.com/albums/hh259/blcall/SN851799.jpg

[Marine Sgt 2111]

My 322 is of the single lube groove type and so is the current production mold. Perhaps yours is of and earlier configuration.

[three dogs]

I am interested in using the Saeco #322 in a Ruger Single Seven. The Meplat to crimping groove should be 0.3in or less for this to work. Could one of you that has a 322 please measure and let me know?

Thank you.

[Outpost75]

Don't know about current Saeco #322, but Tom at Accurate Molds has a similarly shaped 120-grainer which is optimized for the Single-Seven:

131297