30 Herret and Lyman 311410

[Leadmelter]

Anybody have a nice 50 yard load for the above combo. In my TC, 11 gr of 2400 and the 130 gr boolit is a great combination. Checked some manual but I could not find anything.
Thanks
Gerry

[dk17hmr]

In my 30 Herret I am using a 170gr Ranch Dog with H335 powder. Im getting roughly 1750fps out of my 10" barrel and groups nicely out to 125 yards....thats as far as I have shot it at paper, I can ring steel with it at 250 though.

[TCLouis]

So dk17hmr,

How much H335 are you pouring in behind the RD 170 grainer?

I am thinking the 311440 or a 150 grain GC boolit I found.

LET ME KNOW CORRECT LOAD DATA when you get home.

Man there was so much delay on the orders and my getting my act together I am not sure whats going on with all of my GB molds.

I found some boolits marked 8mm 150 PB that I must have a mold for someplace.

Time to do an inventory to see what I have and then mark them!

[dk17hmr]

I want to say 25grs...I will have to check when I get home. It barks pretty good but it's accurate.

Just checked
Running 26.5gr of H335 with the 170gr Ranch Dog, its pretty dang close to max so if your thinking about trying it work up slowly.