Can you tell that I'm liking my 311284 ?

[Ben]

I got outside this morning and cast more NOE 311284's .

Deer season is coming and I'll be shooting this one.
The " numbers " on the bands and nose are PERFECT for
my needs. Swede certainly makes a fine mold. Erik HP'd
this one and did a fantastic job.

I'll sort these by weight before loading.

A fine bullet and as you can see , a real SHOOTER !

http://img.photobucket.com/albums/v494/haysb/PICT0003-28.jpg

http://img.photobucket.com/albums/v494/haysb/NOE%20311284/PICT0003-1.gif

http://img.photobucket.com/albums/v494/haysb/311284%20NOE/395.jpg

http://img.photobucket.com/albums/v494/haysb/311284%20NOE/393.jpg

http://img.photobucket.com/albums/v494/haysb/311284%20NOE/392.jpg

http://img.photobucket.com/albums/v494/haysb/311284%20NOE/397.jpg

I've settled on this particular HP pin shape and depth, as I believe it will offer the best
expansion / penetration ratio for my needs.

http://img.photobucket.com/albums/v494/haysb/311284%20NOE/396.jpg

[slide]

You forgot to give credit to someone else,You, good job casting those boolits!

[white eagle]

Ben
was the hp done by Erik
by chance ???
good shootin'

[Ben]

white eagle :

Yes, Erik did the HP work on this mold , I noted that in the 2nd paragraph.

http://img.photobucket.com/albums/v494/haysb/NOE%20311284%20HP%20Work%20Completed/PICT0007-15.jpg

[giz189]

Good lookin boolits, Ben. What alloy are you using for those? I just wondered with the HP and all. I have an 8mm mould I was thinking about getting Eric to HP for me.

[white eagle]

shezammm I don't know how I missed that
shame on me !

[725]

Once again, Ben, you've set the bar pretty high. What a great job you've done. Keeps me optimistic.

[Ben]

giz189 :

I'm using air cooled wheel weights.

Ben

[smoked turkey]

Ben, nice as always. Gives me something to 'shoot' for.

[frankenfab]

Great work, Ben!

What was the lube used?

ETA: nevermind, I found the thread on your lube!