RCBS mold parts

[hornady]

I have been looking for the old style one piece mold handle screws, I checked RCBS web sight and could not find anything on parts, I found this sight on the web, they are a little pricey, $6.00 for the screws and $3.00 shipping, anyone know of a better source. Thanks.
http://www.hollowpointmold.com/specialty-screws/

[WARD O]

RCBS mould have a lifetime guarantee - call them and you might be able to get them to send some out NC. It's worth a try.

Ward

[plainsman456]

Call RCBS or send them an e-mail.They will fix you up.

[Hardcast416taylor]

Some years ago I got several sets of handle to mold screws from a machinest friend,that he had made. He used Un-Breako brand socket head bolts that he turned the head down so it would be a easy fit into the mold bottom, the allen head opening remained so I could still remove them.Robert

[hornady]

Thanks I sent RCBS an e-mail this morning, waiting to hear back, nothing wrong with the two piece set up they now use, I checked one of my older molds and the one piece screw fits. Arthritic and small parts don’t mix well, and it can be a job changing handles.
The one piece screw works much better for me.

[GLL]

I also contacted RCBS about the old-style screws. They indicated none were available !

Jerry

[deltaenterprizes]

I can make them, PM sent.

[deltaenterprizes]

I have a few sets available. Those little bas**rds are a PIA to make!

[Hardcast416taylor]

I have a few sets available. Those little bas**rds are a PIA to make!


Try doing them as my machinest did for me with un-breako bolts and turn the head down.Robert

[deltaenterprizes]

The unthreaded part is .150'' and .750'' long, the threaded part is 10-32. The unthreaded part has to pass through the threaded part in the mold.

10-32> //////===== < .150''
The hex needs to be on the threaded part.

What you describe looks like this to me: .150'' > =====///// < 10-32 the hex on the unthreaded part.

[mooman76]

I wish they had a parts kit like lyman does.