To those of you that use a Dillon for 223

[gcollins]

I guys,
As I was looking threw my Dillon plates and button and powder funnels my 223 (A) funnel was gone. I have never run 223 threw my Dillon because I swore 25 years ago That I would never load 223. Things change and I am now going to load several 223 so I want to use one of my Dillons. Is the A funnel about 11/2-2" long??
I would be great full for the help.
G

[Springfield]

My 223 funnel is about 2 3/4" long, and I could swear it says "F" on it, but it is kinda double stamped so I can't tell for sure.

[Alvarez Kelly]

My "A" funnel is 1.975 inches long. The "throat" opening is.255 inches. Hope this helps..

[Alvarez Kelly]

An "F" funnel is for 9mm and some 38s. They are usually longer than the .223 funnels. The "F" flairs the case. The "A" funnel does not.

[imashooter2]

Here you go. Dimensioned drawing I made for another member:

http://castboolits.gunloads.com/showthread.php?t=25028

[gcollins]

Thanks for the help!
Imashooter2, Thanks for the drawing and that's what I thought and I think I lost mine!!
greg

[DCM]

It is an A funnel, 1.9685" long, 0.2570" I.D. in the case neck area and 0.2125" bore.

[PD-Hunter]

Dillon has a PDF file that has all the different pieces required for each cartridge. I refer to mine all the time.