40 s&w [Archive] - Cast Boolits

44wcf

08-16-2011, 07:10 PM

While I am waiting on a reply form Hodgdon I will ask here.
Is anyone loading 180gr cast for the 40 S&W with Clays or Titegroup?
thanks

Bwana

08-16-2011, 08:15 PM

My IPSC load is a Lee 175gr TC with 3.5gr Titegroup and a WSPM primer and R-P cases. Total OAL is 1.1" with a taper crimp measuring .418" at the mouth. Thousands and thousands fired, no leading. (.401" sizing, water dropped WW, with a medium hard beeswax/paraffin/vasoline (45/45/10) lube) Minor power factor, about 135PF.

44wcf

08-17-2011, 05:12 PM

My IPSC load is a Lee 175gr TC with 3.5gr Titegroup and a WSPM primer and R-P cases. Total OAL is 1.1" with a taper crimp measuring .418" at the mouth. Thousands and thousands fired, no leading. (.401" sizing, water dropped WW, with a medium hard beeswax/paraffin/vasoline (45/45/10) lube) Minor power factor, about 135PF.

Thanks
That is what I needed.