What am I missing here? .357 Swage Die.

[Utah Shooter]

So I am curious what I am missing from this swage die. Seems that I would need something to hold the projectile.

http://i96.photobucket.com/albums/l194/shmoeee/011-2.jpg

http://i96.photobucket.com/albums/l194/shmoeee/012.jpg

[deltaenterprizes]

You are missing the press to mount the ram in it. I have a 30 cal set up like that. It is not installed in the right press but it works

[torker]

Looks like an old Savage 8 press would work there. Could you take a different pic of the linkage. Is there a threaded hole to insert a handle there?(on the edge of linkage)

[Utah Shooter]

It seams that I am missing the ejection punch and the bottom piece that threads onto the ram for the formation of the projectile.

There is a place for the threaded hole for the handle as well.
http://i96.photobucket.com/albums/l194/shmoeee/004-8.jpg
http://i96.photobucket.com/albums/l194/shmoeee/003-7.jpg

[Utah Shooter]

I am just curious if I need something else to add to it so I can sell it.