Removing bolt Win 1892??

[ohiochuck]

How do you remove the bolt on a Winchester model 1892?
Thnaks!

[maglvr]

I remember the process just not the steps, even though I have one on my lap as I type this.
However, it is very simple once you get into it.
Remove butt stock, remove most forward screw on left side of receiver(it is only a plug), work lever down a bit until the lever/bolt pin lines up with that receiver hole, now on the right side of receiver, insert a punch in the tiny hole and drive the lever/bolt pin out the left side.
Then remove the 2 sliding action locking bars, and the hammer.
That should allow the bolt to slide out.
Hope this helps.

[oneokie]

http://www.gunpartscorp.com/catalog/Products.aspx?catid=7385

[woody1]

see if this helps
http://books.google.com/books?id=Wj4UdDGBbYwC&pg=PA556&lpg=PA556&dq=winchester+model+92+disassembly&source=bl&ots=hDpFCbk-Ei&sig=ZkU_BG0LXkCvVMPitUjvUqWDdis&hl=en&ei=i1MvTsyeCaLjiAKtwLgr&sa=X&oi=book_result&ct=result&resnum=5&ved=0CCsQ6AEwBA#v=onepage&q&f=true

Regards, Woody