mechanical breech seaters

[Hank45]

Looking for manufactures of different kinds of mechanical breech seaters? Thanks, Hank45

[Wayne Smith]

They are usually rifle specific. What rifle are you considering/using? Or is this for collecting?

[Hank45]

Wayne, I am looking for someone to make me a 28/30 breech seater for a Ruger #1? Thanks Hank

[Wayne Smith]

PM Delta Enterprises if you have a design in mind. If you need a design I would suggest you contact the Single Shot Society. I'm at work and don't have a link but they are the experts on such things.

You have two basic ideas, one is a dummy shell that will push the boolit the right amount into the barrel. This assumes the action has a strong enough movement to accomplish this. The other is a device that does the same thing with a fulcrum point attached to the rifle in some way and pushes a rod into the chamber with the boolit on the end of the rod. These rifles typically have some sort of pin or button on the outside of the chamber as the fulcrum point to attach the appliance that pushes the boolit. I'm not sure I'm describing it very well. If you are experienced with Single Shot shooting you may have seen this on a rifle.

[nanuk]

perhaps something like This? (http://castboolits.gunloads.com/showpost.php?p=1175595&postcount=23)

[Hank45]

To Nanuk, that is the picture of the one I am interested in. Thanks, Hank

[Wayne Smith]

PM leadpot and find out his source.

[rhbrink]

That looks like one that is made buy Russ Weber phone number is 907.931.2836 or at russweber@juno.com I use one for my 32-40 and it works great.

Richard