PDA

View Full Version : Really need Info!!!



vangunsmith
01-13-2007, 02:26 AM
I need info on loads for cast lead bullets for a 9.3x57. I just want all info,thanks

omgb
01-13-2007, 03:37 AM
9.3x57 in a Husqvarnahttp://www.loaddata.com/images/database/9.3x57.gifWarning! Notes: Test rifle was a Husqvarna Model 146 with 24 3/4-inch barrel. Loads developed in Norma 9.3x57 brass, using CCI-200, Remington 9 1/2 and RWS-LR primers. All loads should be reduced by 10 percent and worked up carefully. (Handloader Issue #125)Be Alert: Publisher cannot be responsible for errors in published load data.Wt.BulletPowder ManufacturerPowderChargeVelocity (FPS)270SpeerIMRIMR-489546.02,145Remarks: good hunting load270 SpeerIMRIMR-489547.02,205Remarks: maximum270SpeerWinchesterW-74846.01,985Remarks: accurate, mild270SpeerWinchesterW-74848.02,165Remarks: accurate, maximum270SpeerIMRIMR-303142.02,110Remarks: fair232NormaIMRIMR-303145.02,335Remarks: Barnes data232NormaIMRIMR-303148.02,485Remarks: maximum, but accurate232NormaNormaN-20149.02,329Remarks: Norma data232NormaNormaN-20153.02,435Remarks: warm, accurate232NormaWinchesterW-74854.02,450Remarks: most accurate258RWSRottweilR-90246.02,115Remarks: RWS data; R-prefix powders are Rottweil, not available in the U.S., and are shown for reference only. R-902 is close to Norma 201, W-748 and BL-C(2). 258RWSRottweilR-90348.02,001Remarks: RWS data; R-prefix powders are Rottweil, not available in the U.S., and are shown for reference only. R-903 lies between H-335 and IMR-4064286NormaIMRIMR-303140.02,000Remarks: Barnes data286NormaNormaN-20144.62,067Remarks: Norma data, maximum293RWSRottweilR-90347.02,001Remarks: RWS data; R-prefix powders are Rottweil, not available in the U.S., and are shown for reference only. R-903 lies between H-335 and IMR-4064(c) 2004 Loaddata.com

omgb
01-13-2007, 03:38 AM
Take the above loads and find one close to the weight you want. Figure that you can lad at that weight without going over pressure. Adjust downward for velocity. I couldn't find any cast bullet data but these 14 loads can be used as a starting point