vangunsmith
01-13-2007, 02:26 AM
I need info on loads for cast lead bullets for a 9.3x57. I just want all info,thanks
9.3x57 in a Husqvarnahttp://www.loaddata.com/images/database/9.3x57.gifWarning! Notes: Test rifle was a Husqvarna Model 146 with 24 3/4-inch barrel. Loads developed in Norma 9.3x57 brass, using CCI-200, Remington 9 1/2 and RWS-LR primers. All loads should be reduced by 10 percent and worked up carefully. (Handloader Issue #125)Be Alert: Publisher cannot be responsible for errors in published load data.Wt.BulletPowder ManufacturerPowderChargeVelocity (FPS)270SpeerIMRIMR-489546.02,145Remarks: good hunting load270 SpeerIMRIMR-489547.02,205Remarks: maximum270SpeerWinchesterW-74846.01,985Remarks: accurate, mild270SpeerWinchesterW-74848.02,165Remarks: accurate, maximum270SpeerIMRIMR-303142.02,110Remarks: fair232NormaIMRIMR-303145.02,335Remarks: Barnes data232NormaIMRIMR-303148.02,485Remarks: maximum, but accurate232NormaNormaN-20149.02,329Remarks: Norma data232NormaNormaN-20153.02,435Remarks: warm, accurate232NormaWinchesterW-74854.02,450Remarks: most accurate258RWSRottweilR-90246.02,115Remarks: RWS data; R-prefix powders are Rottweil, not available in the U.S., and are shown for reference only. R-902 is close to Norma 201, W-748 and BL-C(2). 258RWSRottweilR-90348.02,001Remarks: RWS data; R-prefix powders are Rottweil, not available in the U.S., and are shown for reference only. R-903 lies between H-335 and IMR-4064286NormaIMRIMR-303140.02,000Remarks: Barnes data286NormaNormaN-20144.62,067Remarks: Norma data, maximum293RWSRottweilR-90347.02,001Remarks: RWS data; R-prefix powders are Rottweil, not available in the U.S., and are shown for reference only. R-903 lies between H-335 and IMR-4064(c) 2004 Loaddata.com
Take the above loads and find one close to the weight you want. Figure that you can lad at that weight without going over pressure. Adjust downward for velocity. I couldn't find any cast bullet data but these 14 loads can be used as a starting point
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.