PDA

View Full Version : Remote wiring for Chrony???



bbailey7821
07-16-2011, 01:28 PM
Is there any trick to wiring up a remote for a basic model Chrony? Looks to me like a mono audio plug and a momentary switch. Any help would be appreciated.

Artful
07-16-2011, 01:39 PM
Nope, That sounds about right

bbailey7821
08-08-2011, 11:51 AM
Okay, if anybody's interested here it is. You'll need a 3.5mm STEREO plug. The wiring pinouts can be found at the following page:


http://www.noplabs.com/chrony/remotecontrol.html

Wally
08-08-2011, 12:09 PM
I had the basic model and I used a homemade remote swtich with it--worked nicely. Then one fine day I tested a new .40 S & W---I hit the Chrony. I sent it back and paid for a replacement upfraded model that had the display unattached to the screens...this worked out very well as the orginal would get gunked up with bullet lube that was very difficult to remove/keep clean.