View Full Version : press/dies question?
plmitch
07-16-2011, 06:20 AM
I’m new to reloading and I have a question about presses and dies. Can dies from one manufacture be used with a press from another manufacturer, for instance using Lee dies in a Lyman press?
Modern dies and presses are nearly all compatable. Dillon's SDB uses proprietary dies. 7/8 - 14 is the standard thread size.
cajun shooter
07-16-2011, 12:05 PM
All dies made with the bench mount type of system and also some hand type such as a Lee will interchange brand wise. They all share the 7/8 x14 thread. They are far from being equal when it comes to how they work and the ammo they produce. In order of how I buy. RCBS, Redding, Dillon, Lyman. You will receive the best service from RCBS bar none. 10 years from now and they will fix a problem for free.
Dillon SDB (square deal B) dies are a smaller exception as are some larger swagging and 50 BMG dies. Someone makes some screw in shotgun dies that are larger also.
Other dies from Dillon are 7/8"-14 and the majority of normal modern dies are too.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.