Bullet master lube

[leftiye]

Did anybody ever figger out how to make Bullet Master lube? I found a can of it on eVil bAy, but I really don't know anything about the chemicals that are in it. What I mean is that the chemicals are listed , but someone with knowledge of those solvents, and plastic resins could maybe work from those to make a workable way to basically paint molybdenum disulfide on to bullets.

I had some back when it was in production and I thought it worked really well with my insanely hot cast loads.

[noylj]

Worst, least-informative MSDS I have seen.
Here are the listed chemicals:
Cas: 78-93-3—MEK
Cas: 107-06-2—dichloroethane
Cas: 108-88-3—toluene
Cas: 123-91-1—1,3-dioxane
Cas: 1317-36-8—yellow lead oxide

Dioxane is a "scary" chemical.

[leftiye]

Anybody out there that could suggest alternatives to poisonous solvents, and still come up with a binder durable enough to "paint on" a boolit? Of course there is Lyman Moly spray, but it costa plenti. Not all that hard to get off either. Doesn't seem that it would be very hard to find a paint type of thang that wouldn't be anathema in a bore, and to add some Moly disulfide into it.