PDA

View Full Version : Lube groove spacing on the 311291


Fugowii
06-13-2011, 12:43 PM
Just want to confirm that it is .150" as I need to order a sizing die? Another question:
Is .150" spacing common as all my other molds have .125" lube groove spacing?
MBTcustom
06-13-2011, 05:52 PM
Forgive me, what does lube groove spacing have to do with a sizing die?
leadman
06-13-2011, 06:24 PM
I think the OP might have a Star? I remember reading that you have to match the lube spacing to the die? also using lead shot to plug some lube holes.

I don't own a Star so maybe someone that does can chime in.
Fugowii
06-13-2011, 06:45 PM
Forgive me, what does lube groove spacing have to do with a sizing die?

A lot. I have a Star and I have to give Lathesmith the correct spacing for the lube grooves when I order a sizing/lube die.


I think the OP might have a Star? I remember reading that you have to match the lube spacing to the die? also using lead shot to plug some lube holes.

I don't own a Star so maybe someone that does can chime in.

Eggzactly!

ETA: I found the dimensions I was looking for.