seagiant
06-10-2011, 06:57 PM
Hi,
I thought I'd show a pic of my latest work on my DL-300 shotshell loader. It came originally with the original tubes that are only 1/16" thick at the walls and they just slide down on some bosses cast into the head piece and are retained by 2 screws on the side. I wanted to use tubing with 1/8" wall thickness and make holders that would protect the tubing also. I also made new caps to match,here's a pic!
I thought I'd show a pic of my latest work on my DL-300 shotshell loader. It came originally with the original tubes that are only 1/16" thick at the walls and they just slide down on some bosses cast into the head piece and are retained by 2 screws on the side. I wanted to use tubing with 1/8" wall thickness and make holders that would protect the tubing also. I also made new caps to match,here's a pic!