Hornady 32 Caliber Checks Inside Diameter

[Ranch Dog]

I'm collecting data for my use concerning the Hornady 32 caliber check (#7080), and would like to see what inside diameter measurements others come up with. Measure a minium of ten and select your average. Hornady checks only please!

Look for additional polls for just about all the other Hornady checks.

[JonB_in_Glencoe]

answer is .304 carefully measured as best as I could with a freshly calibrated dial calipers.
I use a .250 standard.
Jon

[7x57]

I am getting .299 on mine, lot # 2080498.

[Dorf]

Micheal, I'm getting .300" on a 10 unit sample. Lot#2081076. (Entered in the "Other" category of the poll) Unfortunately, my RD mould is tossing bullets with a .303" shank using wheel weights. In short, I'm having diffulty getting the Hornady checks satisfactorily (sp) installed. Thx, Dorf

[jtaylor1960]

I get .302 with almost no variation.

[largom]

I get .300 and .301 on mine.

Larry

[adrians]

i'm not sure how old these are but they measure ( i measured 10) .302--.304,, so the average is circa .303,,,not very scientific (there could be some oxidation on the inside edge)giving slight variations in dia.
here's a pic of the lot # maybe someone could hazard a guess as to their age ,i haven't a clue.[smilie=l:

[Jon K]

.300-.3015 avg/lot#2100515

Jon