PDA

View Full Version : Favorite 40 Cast


philthephlier
05-30-2011, 07:43 PM
Please post your favorite cast bullet for the 40 s&w.
casterofboolits
05-30-2011, 09:42 PM
40-145-TCPB (re-cut Lyman four cavity mould) and the Lyman 40-175-TCBB.
Doby45
05-30-2011, 10:41 PM
Mihec 401-165 RNFP
noylj
05-30-2011, 11:47 PM
RCBS 10mm-170-SWC
jameslovesjammie
05-30-2011, 11:52 PM
Mihec 401-165 RNFP

+1 with the Penta Pins.
sargenv
05-31-2011, 12:26 AM
LBT 185 Long RN..
fredj338
05-31-2011, 01:18 AM
ine is the Lyman #401043, for the 38-40, but makes a great 40 or 10mm bullet. I like the two lube grooves. http://www.lymanproducts.com/lyman/bullet-casting/mould-details.php?entryID=17
HammerMTB
05-31-2011, 09:05 AM
I like my Lee 175TC. it was a BB mold, but I took off the BB and made it FB
I'll be getting the pointy boolit from the group buy soon. I'm hoping it can become a favorite for shooting pins.
Intel6
06-02-2011, 11:08 AM
I like the Lee 175 TC mould because it is cheap and is a 6 cavity. I took one of them and milled down the top of it so now it makes a 150 gr. bullet with the same profile.
Lizard333
06-02-2011, 12:03 PM
RCBS 10mm-170-SWC

second this one.
AZ-JIM
06-02-2011, 09:24 PM
I like my Lee 175TC. it was a BB mold, but I took off the BB and made it FB.

+ 1. It's the only one I have but it works well for me

az-jim
Ausglock
06-03-2011, 02:11 AM
+ 1. It's the only one I have but it works well for me

az-jim

Ditto.
scrapcan
06-03-2011, 10:52 AM
+1 to Doby45,

the penta point has been a good one in teh 400 corbon so expect it would be good in the 40S&W.