Hunter
12-27-2006, 11:49 PM
I just got my RCBS Case Master gauging tool set up and it seems to be a quality reloading tool. If you are not familar with the tool it is for checking for case neck runnout, bullet runnout, measuring case neck thickness, cartridge length, checking for seperation before the signs appear on the outside of the case.
I have checked several of my Winchester .308 cases and the tool is easy to use and very accurate. The directions were easy to follow and had some good general information about reloading as well.
I would consider the tool a good addition to the reloading bench where caseneck and bullet runnout are important as well as keeping good measurments of case constancy for accuracy.
I have checked several of my Winchester .308 cases and the tool is easy to use and very accurate. The directions were easy to follow and had some good general information about reloading as well.
I would consider the tool a good addition to the reloading bench where caseneck and bullet runnout are important as well as keeping good measurments of case constancy for accuracy.