Size of set screw for Milhec DC mold?

[Shooter6br]

Checked my 45 ACP DC mold . I notice the set screw for the plate was missing. Anyone know what size it is? Where i can get on in the USA.? :lovebooli

[justingrosche]

When I lost one from my mold, I had to drill it out with a #21 bit , and tap it to 10-32.

[Doc Highwall]

Home Depot by my house carrier some metric screws. Try them or a hardware store near you. You could also PM MiHec and ask him what size they are and then let your fingers do the walking with the phone and ask the hardware stores if they have that size screw.

[Shooter6br]

Thanks guys will do. I beleive it never had the screw installed from day one. Cast great so i did not monkey with it

[MiHec]

Set screw is M4x4

[Shooter6br]

Thanks hope I can find one in the USA( P>S Love your molds!)

[Von Dingo]

Well stocked hardware stores have them.

[Shooter6br]

Great I will look at Lowes Sears Home depot and some non chain ones