View Full Version : lee hollow point mold
gofasttodd
05-14-2011, 06:14 PM
after lots of thinking and modifications i have almost perfected a lee hollow point mod.
I have currently destroyed the last two molds i have tried to mod.
I am hoping someone might have a junk mold preferably lee and something in a flat point that there going to junk that they could send me so i can continue my attempts
white eagle
05-14-2011, 06:28 PM
Lee's are inexpensive and just rite down the street
(so to speak)
gofasttodd
05-14-2011, 06:46 PM
yeah bu they wont make a hollow point mold anymore
gofasttodd
05-14-2011, 08:31 PM
will make donations to whomever has one
MT Gianni
05-14-2011, 11:10 PM
I believe that success would best be found copying their design for a captured pin al la Cramer.
gofasttodd
05-15-2011, 12:32 AM
what iam trying is to make different centering pins and make a plate tat sits on top of the mold
which is attached to the mold handle pivot so when you open mold pins come free from blocks and tap tap bullets fall from pins the plate on top of blocks wold be also aligned with set screws sticking above mold blocks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.