View Full Version : Need some instruction
High Desert Hunter
05-14-2011, 04:33 PM
OK, so I am now the proud owner of a Miha Mould, a 357 HP. I have never cast HP before, so I am wondering how best to learn? Also, I have the mould in my RCBS handles, but I am not sure if they are the right ones for the job? Any help will be greatly appreciated.
Dave
Jailer
05-14-2011, 04:42 PM
casting with a cramer style mold (http://www.mp-molds.com/index.php?pr=Cramer_style_casting)
geargnasher
05-14-2011, 06:19 PM
Thanks, Jailer, good thread reference. Hot mould is the key, especially hot pins. Preheat and cast at a rapid pace.
Gear
I am a thinking you need the Lee six cavity handles.
That's what I use.
Jailer
05-14-2011, 10:46 PM
Copied from the MP molds site:
- fits on MP mold handles or LEE 6 cavity handles
High Desert Hunter
05-15-2011, 08:59 AM
Got it, thank you very much gentleman. I will order another set of mould handles.
Dave
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.