View Full Version : Williams Foolproof Giblock part #
ohland
05-13-2011, 06:05 PM
Williams calls it "Marlin 6-48 Giblock", part # 061613
:drinks:
ohland
05-16-2011, 01:35 PM
Williams calls it "Marlin 6-48 Giblock", part # 061613
:drinks:
Original 6x48 thread length is .075 long.
Knurled Giblock screw tip extends into the receiver @ .125". Grind 0.130" + off the tip of Giblock Screw. The Knurled Giblock screw original thread length is .270, so don't worry if you remove a little over .150"....
We now return to our regularly scheduled program...
pietro
05-19-2011, 09:37 PM
FWIW, when I needed to order a giblock screw for one of my Williams FP's, it was about half the thickness of a #6 (6-48) screw.
Most FP BASE screws, however, are 6-48.
.
ohland
05-20-2011, 08:07 AM
FWIW, when I needed to order a giblock screw for one of my Williams FP's, it was about half the thickness of a #6 (6-48) screw.
Most FP BASE screws, however, are 6-48.
.
I didn't measure the thread, you might be right.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.