GSaltzman
05-12-2011, 09:21 AM
Received 2 new molds from Mr Bruce at BRP. I ordered the 454424 for my Ruger Bisley and thr 429421 for my Bisley 44 special. Both molds cast boolits larger than original and that was what I needed. Mr Bruce may correct me if I'm wrong but the molds were received in 2 weeks. Regardless it was a fast turn around. This order was no different from my other in that service was outstanding and the finished product was first class. After cleaning the molds I started casting with both and after a short break in they started dropping good boolits. Now I find on these 2 molds if I insert the spout on the ladle directly into the sprue hole and cast with a little pressure I get perfect boolits everytime. 454424 drops .455 and the 429421 drops .4325 with my alloy which is 60/40 wheel weights/ pb. I went 60/40 to make a little harder air cooled than what I was getting at 50/50. Still testing so things may change. Weights as cast are on the mark for the 454424. The 429421 as cast are weighing right at or just a couple of tenths below 255 grains. Good looking boolits with bands that are filled out and sharp. We are lucky to have all these choices right here on this site. Can't wait to shoot these!