Lyman 310 die body numbers.....?

[3006guns]

The Lyman 310 die list under Castpics is very helpful, but seems to be missing one piece of info. It lists the bullet seating stem numbers for cast or jacketed, but not the number of the die body needed. Since the die body closes or crimps the case mouth, it's kinda important!

I need to know what the seating die BODY numbers are needed for 6.5 and 7.7 Jap if anyone has them. Thanks!

[Green Frog]

The seating die body number is the same as the sizing die body number. The only thing different is the priming chamber/die.

Froggie

[3006guns]

Thank you Froggie.........guess I should have looked at one of my existing die sets[smilie=b:, but you put me on the right track!

[floodgate]

3006guns:

Just for the record, the 6.5 Jap. takes #137 and the 7.7 takes #146.

floodgate