Lubing Cramer style mould

[btroj]

I have a Mihec Cramer style mould on order. Just wondering if you should use Bullplate on the parts of the pin assembly that slide. Seems to me that if it move it should be lubed.

If this mould is nearly as nice as my riser Mihec mould o am going to like it. ALOT.

[stubshaft]

Bullplate works great for that. Just use a very small amount, as you don't want it to migrate into the cavity.

[captaint]

I Q-tip a little Bullplate on my Cramer pin shafts every time I use them. Works great!! enjoy Mike

[Doby45]

Easiest thing to do is close the mold and lube the parts of the pins protruding on the outside of the mold with a Q-Tip. A good swipe on each pin and the lube will migrate a "little" into the pin cavities and lube the whole pin without affecting the mold cavities.