View Full Version : Lee mould handle question
David LaPell
04-28-2011, 12:36 PM
Is there any way to take the mould off a set of Lee mould handles. I have a mould I don't use alot and a Lyman mould that is in need of a handle.
Drill out the peened-over areas and the long pins will drop out. If you want to re-install the handles, the holes will need to be re-peened.
pilot
04-28-2011, 07:32 PM
Lee makes a 6-cavity mold handle. Can I use that with two cavity Lyman mold blocks?
mooman76
04-28-2011, 07:41 PM
Lee fits the Lyman 1 and 2 cavity perfect and RCBS with a little grinding to make them thinner.
pilot
04-28-2011, 08:02 PM
Thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.