anybody got a dimensioned drawing of an H&G 314 9mm mold?

[MSGO-Hammer]

Does anyone have or know where I can find a dimensioned drawing of an H&G 314 9mm mold?

Here is a link to a pic of the mold.
http://hgmould.gunloads.com/molds/314_1.jpg

[Texasflyboy]

Does anyone have or know where I can find a dimensioned drawing of an H&G 314 9mm mold?

Here is a link to a pic of the mold.
http://hgmould.gunloads.com/molds/314_1.jpg

I owned the mould in that photo. It's long gone.

#314 is design #331's cherry with a deeper base to get the extra 15 grains. If no one has a #314, you an extrapolate the design from a #115 (late style) or a #331. I know someone on this board who has a 6 cavity #331.

#314 is identical to #331, which is 120 grains. #331 is nothing more than #115 with an improved front driving band. For a short period of time, there were two styles of #115, the original design with a thin front driving band, and then the later style, with the improved thicker band.

I have several 10 cavity #115's. In the early and late styles.

Since #115 evolved into #331, it's essentially the same cherry as #314.

Once more, just to make sure everyone is confused:

#115 was the original design, @ 120 grains. Wayne didn't like the front driving band on #115 and finally fixed it. He liked the improved deisgn so much he retired the #115 and called the new design #331. #331 is the same cherry as #314, 314 is just a bit longer in the base to get the extra 15 grains.

I have 8,000 #331's sitting in ammo cans waiting to be called up for duty. I can mail you one if you want an example. PM me with your details.

Tom

[MSGO-Hammer]

PM sent. Thanks!!