Fredx10sen
04-08-2011, 10:48 PM
I decided to catalog all my molds this week. After dragging them out and writing numbers and notes etc. I found a mold I haven't cast with yet. I have had this mold for awhile and have never cast with it as of not owning a gun that used it. On top of the sprue plate is stamped Shiloh Products ( hard to read) On the sides at the top is #'s 0 542 below is #'s 0842. It is a single cavity aluminum mold which looks like a soup can with three lube grooves. Looks to be .530 or .531 Dia. Seems to be one of the cheaper molds. I bought a 54 Cal TC hawken a couple of weeks ago and hope I can use this one as well as the Mini and RB molds that I also have. Any information that you have on this mold and experience with it would be much appreciated. Thanks, Fred AKA Burly Bear Fred. :veryconfu
I also might be interested in a Maxi-ball for the Hawken. I do have an extra Lyman # 575213 Mini SC Mold that might could be used as trading material. [smilie=s:
I also might be interested in a Maxi-ball for the Hawken. I do have an extra Lyman # 575213 Mini SC Mold that might could be used as trading material. [smilie=s: