sprue plate bolts

[realfisher]

i have 2 lee molds that i recieved with out sprue plates. i will order the sprue plates from midway, but i need the bolt set up that the sprue plate slides under.

i dont want to deal with lee, any ideas where i can get the bolt from? thanks

[462]

Since they are more of a speciality type bolt, I doubt that a hardware store would have them. Though you don't want to, you may have to buy from Lee..

[BCall]

Order them on line. Sprue plate is 8.80, hold down .50, hold down bolt .60, wave washer .60. Add $4 shipping I think. Easier than ordering from 2 different places.

[skeet1]

Try http://www.titanreloading.com/ Im sure they can help you with the parts you need.

Ken

[turbo1889]

Lee has updated their web-site significantly. You can now order each and every little part for most of the stuff they sell directly from their website right down to the screws and sprue plates and such on all the molds.

First you go to their web-site and find the mold you have or similar and click on it so that you are to that products individual page. Like this:

http://leeprecision.com/xcart/MOLD-6-CAV-TL452-230-2R.html

Right above where it says "Details" in big red letters it will say "Click here to view parts" where the "here" is underlined and is a link. Click on it and it will take you to another page where you can individually order every single part that the mold is made up of including the naked blocks themselves with no other hardware if you so desire. Like this:

http://leeprecision.com/xcart/MOLD-6-CAV-TL452-230-2R-PARTS

[realfisher]

thanks for the help

[deltaenterprizes]

Thanks for the link to Titan.