Adirondack Jack
12-03-2006, 03:20 PM
Just thought I'd pass this along. I recently bought a brandy new LEE 6 cav mold from biglube.com. Dick Dastardly has come out with a new mold for a 150 .45 bullet for use in ROA cap and ball guns and cartridges.
I run em in Cowboy .45 Special cases (see cowboy45special.com for what that's about) in rugers and marlins, and have even tried em in .45 ACP with good results.
http://img.photobucket.com/albums/v54/adirondack_jack/EPP-UG-45-150-c-45-s-and-ac.jpg
The neat part, aside from the big lube groove that makes em BP friendly and don't hurt a thing for smokeless, is the slight rebate at the base. This makes it easy to start em both in cap and ball cylinders and in brass when loading. Very neat bullet.
I run em in Cowboy .45 Special cases (see cowboy45special.com for what that's about) in rugers and marlins, and have even tried em in .45 ACP with good results.
http://img.photobucket.com/albums/v54/adirondack_jack/EPP-UG-45-150-c-45-s-and-ac.jpg
The neat part, aside from the big lube groove that makes em BP friendly and don't hurt a thing for smokeless, is the slight rebate at the base. This makes it easy to start em both in cap and ball cylinders and in brass when loading. Very neat bullet.