RCBS molds

[sixpointfive]

I have two rcbs moulds 38-150 2 cav and 30-150. What I noticed is the groove or slot the handle fit in are different heights. One set has wider slots like a lyman and the other are slim aprox.300 for the RCBS handles. Currently I am using my 6 cavity lee handles for my 38-150 mould and the rcbs handles for the other mold. Is it possible that someone ennlarded the slot height so the 38-150 mould could be used on lyman handles? If so they do not fit on lyman handles because the rcbs molds are too big. Any suggestions here? Did the RCBS molds come with different slot heights?
:cbpour::redneck:

[ubetcha]

I have Lyman and RCBS molds and handles and at times do interchange them with no noticable differance

[GLL]

Try a set of LEE 6-cavity handles on the RCBS mould with the enlarged slots !
LEE handles are very inexpensive. Everyone should have a set or two around just for such situations ! :) :)
They can be filed and ground to fit just about anything !

Jerry