BRP--Let me tell you what he did :)

[rockrat]

Had Bruce cut me a mould for the 3-180 sil boolit, but with the gas check cut off. It didn't work out accuracy wise , so I emailed him and he said he could re-cut it for another boolit.
Sent it back to him to re-cut for a 462-360 boolit, but before he could cut it, I asked for four cavities with the 463-515 boolit. He said he couldn't fit 4 in the mould, so we went with 2 cav. of each.
He went to cut it, but the mould fractured( he said a used mould might do this)and ruined it.

He went and made a brand new mould for me, NO EXTRA CHARGE!!!!!!

Thats what I call customer service:bigsmyl2:

[RobS]

He's never done me wrong and has always been up front and honest with everything.

[onesonek]

I can also say Bruce went what I consider above and beyond when he built the mold I got from him,,,and a darn good mold it is!!!!

[Crusty Deary Ol'Coot]

I think there is a good possibility of a BRP mold in my future.

Sent a question to Bruce awhile back and he gave me a quick and great response.

I know none of us are perfect, but I'm sure hearing a lot of good about BRP.

Just seems a lot more pleasent then one other I can think of.

Keep em coming!

Crusty Deary Ol'Coot

[GLL]

I have a cabinet full of Bruce's moulds ! He is the most knowledgeable mould maker around ! His extensive experience and continuous field testing is the key !

That combined with great machining skills has put a big dent in my checking account ! :) :)

Jerry

[Jailer]

Did you insist on paying him? I would have, especially a little guy operation with the customer service rep that he has.

[captaint]

I have a couple of Bruce's molds, and there will be more, I can assure you all... enjoy Mike

[D Crockett]

I am in need of a mould maker how would one get hold of Bruce D Crockett

[GLL]

BRP:

http://www.brp.castpics.net/

Jerry

[Lloyd Smale]

hes a top shelf guy to deal with and makes an excellent product!