Mould for a BSA Cadet

[LeeRoy]

I have a BSA Cadet 310 - 12 - 120. I use 32-20 brass.

The barrel is .319, this was learned with the help of mooman76. Thanks Again!!!

Now the quest is for a boolit mould for this sweet little shooter. I am going to read the post that, search has brought up.

Any suggestions on a mould would be happily taken.

LeeRoy

[smokemjoe]

CBE in Aust. makes molds for the 310

[JerryW]

Years ago I used a old Lyman 32-20 mould with the bullets un sized that worked pretty well. JerryW

[LeeRoy]

Thanks for the replies.

smokemjoe I am thinking that I will contact them to see if their moulds will throw a
boolet .319-.321.

JerryW I have tried the 311316 but mine throws a WW boolet at .312. I believe that this is the 32-20 that Lyman sells.

I should have stated this in the first post, Sorry.

LeeRoy