Piedmont
03-04-2011, 02:23 AM
I'm hoping some of you have experience with shooting the 9mm Luger out of double action revolvers. Any and all comments welcome on the guns, clips, etc.
The inspiration for this thread is that I just today fitted a 9mm Speed Six cylinder onto a .357 Security Six. The cylinder had been in my project box for over ten years. I don't have any clips yet and will probably try it out first without them and see if it is reliable that way.
There is a long cylinder jump but the case capacity is so small that light loads should be a breeze.
There is no purpose for this project really, just messing with something different in a good, solid platform. If things don't work out I will put the .357 cylinder back in.
The inspiration for this thread is that I just today fitted a 9mm Speed Six cylinder onto a .357 Security Six. The cylinder had been in my project box for over ten years. I don't have any clips yet and will probably try it out first without them and see if it is reliable that way.
There is a long cylinder jump but the case capacity is so small that light loads should be a breeze.
There is no purpose for this project really, just messing with something different in a good, solid platform. If things don't work out I will put the .357 cylinder back in.