Dutchman
03-01-2011, 10:48 PM
About 10-11 years ago when I was getting rolling blocks from Sweden this rifle was one among 10 in a box. I knew it was coming as I'd seen these photos.
The action is a Husqvarna m/1867-68 military #1 black powder. The barrel was m/1896 Swedish Mauser 6.5x55. The machine work required to convert to a rimless extractor was extensive and fairly well done although it looked to have been done in the early part of the 20th century.
Out of curiosity I stuck a field gauge in the chamber and it rattled like a BB in a boxcar. Grossly unsafe and yet somebody had been shooting it in Sweden for a long time.
What I did was pull the barrel off and chop it to a 6" stub and sold the action on Auction Arms with the information as to why I yanked the barrel off. It was a curiosity more than anything. I'm also a little sorry I didn't keep it.
http://images49.fotki.com/v1458/photos/2/28344/1676633/65a-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65b-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65c-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65d-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65f-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65g-vi.jpg
In this picture you can see a small hole into the barrel at the left side of the photo. That hole went frighteningly deep. It was also covered by the handguard. Why would someone put a hole there? That's right where the chamber is located. That was the other reason I removed the barrel though I did supply the 6" stub to the buyer.
http://images110.fotki.com/v570/photos/2/28344/1676633/action8-vi.jpg
The action is a Husqvarna m/1867-68 military #1 black powder. The barrel was m/1896 Swedish Mauser 6.5x55. The machine work required to convert to a rimless extractor was extensive and fairly well done although it looked to have been done in the early part of the 20th century.
Out of curiosity I stuck a field gauge in the chamber and it rattled like a BB in a boxcar. Grossly unsafe and yet somebody had been shooting it in Sweden for a long time.
What I did was pull the barrel off and chop it to a 6" stub and sold the action on Auction Arms with the information as to why I yanked the barrel off. It was a curiosity more than anything. I'm also a little sorry I didn't keep it.
http://images49.fotki.com/v1458/photos/2/28344/1676633/65a-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65b-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65c-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65d-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65f-vi.jpg
http://images49.fotki.com/v1458/photos/2/28344/1676633/65g-vi.jpg
In this picture you can see a small hole into the barrel at the left side of the photo. That hole went frighteningly deep. It was also covered by the handguard. Why would someone put a hole there? That's right where the chamber is located. That was the other reason I removed the barrel though I did supply the 6" stub to the buyer.
http://images110.fotki.com/v570/photos/2/28344/1676633/action8-vi.jpg