hiram
02-12-2011, 01:37 PM
I have an AR 7. It has two action springs. The firearm will cycle if I use high speed ammo, not standard velocity.
I thought about cutting 1/2 coil off of each spring until it cycles with standard velocity.
1 - Should I leave it the way it is?
2 - Any other way(s) of changing the current setup?
3 - I did not take the gun all the way apart. Can the springs be changed?
Thanks
I thought about cutting 1/2 coil off of each spring until it cycles with standard velocity.
1 - Should I leave it the way it is?
2 - Any other way(s) of changing the current setup?
3 - I did not take the gun all the way apart. Can the springs be changed?
Thanks